The DOT TARGET MARKER is a Universal Marking System that marks, on the wall, the exact fastener placement to easily hang your project. Place the sticky DOT TARGET MARKER, target side face down, on the back of the project. The center hole of marker(s) should be placed where the fastener will end up in the hanger Press the project firmly to the wall to transfer the marker(s) Install fastener(s) in the center of the DOT TARGET MARKER(s); remove the marker(s) Hang your project The WIRE TRACK is a unique product that assists with the hanging of pictures with a wire on the back. It is great for groupings and oversized projects. The Wire Track adheres to the back of the project holding the wire in place, simulating how it will be hanging on the wall. After the DOT Target Marker has been transferred, the Wire Track acts as a guide to bring the fastener into the track to catch on the wire. The ACCESSORY PIECE is a multi-functional piece that assists the other pieces in the kit with challenging projects. If you're trying to place the DOT Target Marker on the back of your project, and the hanger won't cooperate, the Accessory Piece can be used to hold the hanger in place (this happens sometimes with the d-ring or triangle type of hangers). Place ACCESSORY PIECE on the loose hanger ring to hold it in place Center the hole of the ACCESSORY PIECE where the fastener will be placed Press the corners of the ACCESSORY PIECE against the backing of the frame to hold the hanger in place Place DOT Target Marker on top of the ACCESSORY PIECE and continue with the hanging process as shown above

DOT TARGET MARKER is a Universal Marking System

It marks, on the wall, the exact fastener placement to easily hang your project